WEKO3
-
RootNode
アイテム
There is a newer version of this record available.
Bending Fatigue Strength of Carburized Gears with an Artificial Notch at the Fillet
http://hdl.handle.net/10458/762
http://hdl.handle.net/10458/762c1245c2d-ae07-4c9d-b788-e7e451789f0f
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
GangDeng12.pdf (1.0 MB)
|
|
| Item type | 学術雑誌論文 / Journal Article(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2007-10-17 | |||||
| タイトル | ||||||
| タイトル | Bending Fatigue Strength of Carburized Gears with an Artificial Notch at the Fillet | |||||
| 言語 | en | |||||
| 言語 | ||||||
| 言語 | eng | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| キーワード | Gear, Notch, Fatigue, Fracture Mechanics, Nontraditional Machining, Wire-cut Electric Discharge Machining, Focused Ion Beam, Surface Integrity | |||||
| 資源タイプ | ||||||
| 資源タイプ | journal article | |||||
| 著者 |
鄧, 鋼
× 鄧, 鋼× Masuyama, Tomoya× Kato, Masana× Inoue, Katsumi |
|||||
| 抄録 | ||||||
| 内容記述タイプ | Abstract | |||||
| 内容記述 | The fatigue strength of carburized gears is influenced by the latent defect in the surface layer. To clarify this influence, the bending fatigue strength of carburized gears with an artificial notch is evaluated in this paper. The notches are processed by wire-cut electrical discharge machining （WEDM） and focused ion beam （FIB） etching to obtain the required depth. The fatigue strength of the tooth with the notch over 35 μm in depth decreases markedly in comparison with the nonnotched tooth. In the case where the notch is shallower than 20 μm, cracks initiated from the notch are not observed and the strength is not reduced. By assuming a crack of the same length as the notch, the stress intensity factor K（I） is calculated considering the effect of residual stress. The strength expected from the stress intensity factor range is higher than the obtained strength of the gear with the notch. | |||||
| 言語 | en | |||||
| 書誌情報 |
en : JSME international journal. Series C, Mechanical systems, machine elements and manufacturing 巻 43, 号 2, p. 432-438, 発行日 2000-06 |
|||||
| 出版者 | ||||||
| 出版者 | 日本機械学会 | |||||
| 言語 | ja | |||||
| 出版者 | ||||||
| 出版者 | Japan Society of Mechanical Engineers | |||||
| 言語 | en | |||||
| ISSN | ||||||
| 収録物識別子タイプ | ISSN | |||||
| 収録物識別子 | 13447653 | |||||
| 書誌レコードID | ||||||
| 収録物識別子タイプ | NCID | |||||
| 収録物識別子 | AA11179487 | |||||
| 著者版フラグ | ||||||
| 出版タイプ | VoR | |||||
