WEKO3
-
RootNode
アイテム
There is a newer version of this record available.
Development of Water Pump System with 200 Litres Charcoal Furnace Tank
http://hdl.handle.net/10458/6802
http://hdl.handle.net/10458/68022ddeebee-7d32-4ea6-b91e-964ad89b1dff
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
本文 (1.9 MB)
|
|
| Item type | 会議発表論文 / Conference Paper(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2020-06-21 | |||||
| タイトル | ||||||
| タイトル | Development of Water Pump System with 200 Litres Charcoal Furnace Tank | |||||
| 言語 | en | |||||
| 言語 | ||||||
| 言語 | eng | |||||
| 資源タイプ | ||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_5794 | |||||
| 資源タイプ | conference paper | |||||
| 著者 |
Siriwat, Vangdeesorn
× Siriwat, Vangdeesorn× Komsan, Wongkalasin |
|||||
| 抄録 | ||||||
| 内容記述タイプ | Abstract | |||||
| 内容記述 | The objective of this research was to develop water pump system for agricultural with biomass fuel. The system consisted of three main parts: heater tank, liquid piston tank and storage tank. The working principle consisted of two stages: heating, pumping and vapor flow stage and cooling and water suction stage. The pump had fiber piston plate to increase volume in a liquid piston tank to pump water. The source of energy was biomass fuel from Para rubber wood. The storage tank was set at 3 m. and test for 6 hours. The finding indicated that the temperature in heater tank was 104℃, the pressure in pumping stage was 19 kPa and in suction stage was -81 kPa, power was 2.536 watt, pump volume was 287 litre and pump efficiency was 0.0018%. | |||||
| 言語 | en | |||||
| 書誌情報 |
en : International Conference on Science, Technology & Education (ICSTE 2016) p. 41-44, 発行日 2016-09 |
|||||
| 著者版フラグ | ||||||
| 出版タイプ | VoR | |||||
| 出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||
Share
Cite as
Siriwat, Vangdeesorn, Komsan, Wongkalasin, 2016, Development of Water Pump System with 200 Litres Charcoal Furnace Tank: 41–44 p.
