WEKO3
アイテム
Effect of Surface-Finishing on Surface Durability of Surface-Hardened Gears
http://hdl.handle.net/10458/0002000527
http://hdl.handle.net/10458/0002000527c5f2fbb1-8c01-4199-afe9-4009434e4079
| Item type | 学術雑誌論文 / Journal Article(1) | |||||||
|---|---|---|---|---|---|---|---|---|
| 公開日 | 2024-03-04 | |||||||
| タイトル | ||||||||
| タイトル | Effect of Surface-Finishing on Surface Durability of Surface-Hardened Gears | |||||||
| 言語 | en | |||||||
| 言語 | ||||||||
| 言語 | eng | |||||||
| 資源タイプ | ||||||||
| 資源タイプ | conference paper | |||||||
| アクセス権 | ||||||||
| アクセス権 | metadata only access | |||||||
| 著者 |
中西, 勉
× 中西, 勉× Ariura, Yasutsune
|
|||||||
| 抄録 | ||||||||
| 内容記述タイプ | Abstract | |||||||
| 内容記述 | The effect of tooth surface-finishing on the surface durability of surface-hardened gears was investigated from the viewpoint of gear-manufacturing methods and load carrying capacity. First, the accuracy and tooth surface roughness of gears finished by various methods ( hobbing ,skiving・・・finish-hobbing with a cemented carbide tipped hob, honing with a screw-type hone, polishing with a buffing wheel and grinding) were studied in detail. Second, the load-carrying capacities of these gears were investigated by using a power circulating-type gear testing machine. Third, the tooth surface failures of the various finished gears were examined with a scanning electron microscope. The following results are obtained; (1) The tooth surface of finished gears consist of many different asperities. (2) In the surface-hardened gears with rough tooth surface, the surface failures ‘’grey-staining, pitting, spalling’’ occur under a heavy load. (3) The conditions of tooth surface (roughness and machining marks) have the greatest influence on the phenomenon of ‘’grey-staining ‘’. | |||||||
| 言語 | en | |||||||
| 書誌情報 |
en : Proceedings of the International Conference on Motion and Power Transmissions MPT 1991-Hiroshima p. 828-833, 発行日 1991-11-22 |
|||||||
| 出版者 | ||||||||
| 出版者 | JSME | |||||||
| 言語 | en | |||||||
| 出版者 | ||||||||
| 出版者 | 日本機械学会 | |||||||
| 言語 | ja | |||||||
| 著者版フラグ | ||||||||
| 出版タイプ | NA | |||||||
