WEKO3
-
RootNode
アイテム
There is a newer version of this record available.
円筒歯車の曲げ負荷能力の向上に関する研究(第2報, 左右非対称歯形歯車の曲げ負荷能力の向上)
http://hdl.handle.net/10458/765
http://hdl.handle.net/10458/765aec397e7-e079-499d-8fe4-69a64717ad28
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
GangDeng15.pdf (598.8 kB)
|
|
| Item type | 学術雑誌論文 / Journal Article(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2007-10-17 | |||||
| タイトル | ||||||
| タイトル | 円筒歯車の曲げ負荷能力の向上に関する研究(第2報, 左右非対称歯形歯車の曲げ負荷能力の向上) | |||||
| 言語 | ja | |||||
| タイトル | ||||||
| タイトル | Bending Capacity Enhancement Using an Asymmetric Tooth Profile (2nd Report, Bending Capacity Enhancement of the Asymmetric Teeth) | |||||
| 言語 | en | |||||
| 言語 | ||||||
| 言語 | jpn | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| キーワード | Gear, Tooth Profile, Pressure Angle, Stress Amplitude, Load Capacity, Bending Fatigue test | |||||
| 資源タイプ | ||||||
| 資源タイプ | journal article | |||||
| 著者 |
鄧, 鋼
× 鄧, 鋼× 中西, 勉× Nakanishi, Tsutomu |
|||||
| 抄録 | ||||||
| 内容記述タイプ | Abstract | |||||
| 内容記述 | This study presents a method to enhance the bending load capacity of gear using different standard pressure angles in the front side and backside tooth profile. In this report, the calculations were performed for not only the maximum stress but also the stress amplitude from fillet to tooth root considering the gearing procedure. A larger backside standard pressure angle leads to a small tensile tooth root stress but a large compressive stress at the next or previous tooth root. As the result for the stress amplitude calculation, the increase in the backside standard pressure angle will decrease the stress amplitude at the tooth fillet except at the tooth root. Bending fatigue tests were performed for two types of normalized and induction-hardened gears to evaluate the enhancement in bending load capacity using a larger backside standard pressure angle. The standard pressure angles of the front side/backside of the tooth of test gears were 20/20 deg. and 20/30 deg. The fatigue test results confirmed the significant increase in bending load capacity by the use of a larger backside pressure angle. |
|||||
| 言語 | en | |||||
| 書誌情報 |
ja : 日本機械学會論文集. C編 en : Transactions of the Japan Society of Mechanical Engineers. C 巻 69, 号 679, p. 737-742, 発行日 2003-03 |
|||||
| 出版者 | ||||||
| 出版者 | 日本機械学会 | |||||
| 言語 | ja | |||||
| ISSN | ||||||
| 収録物識別子タイプ | ISSN | |||||
| 収録物識別子 | 03875024 | |||||
| 書誌レコードID | ||||||
| 収録物識別子タイプ | NCID | |||||
| 収録物識別子 | AN00187463 | |||||
| 著者版フラグ | ||||||
| 出版タイプ | VoR | |||||
