WEKO3
アイテム
Fracture Toughness of Zirconia Ceramics with 3% MgO by SENB Test
http://hdl.handle.net/10458/6757
http://hdl.handle.net/10458/6757204862f6-8b6f-4467-bab6-f9754223c9aa
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
本文 (342.8 kB)
|
|
| Item type | 会議発表論文 / Conference Paper(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2020-06-21 | |||||
| タイトル | ||||||
| タイトル | Fracture Toughness of Zirconia Ceramics with 3% MgO by SENB Test | |||||
| 言語 | en | |||||
| 言語 | ||||||
| 言語 | eng | |||||
| 資源タイプ | ||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_5794 | |||||
| 資源タイプ | conference paper | |||||
| 著者 |
A., Takahashi
× A., Takahashi× R., Fukushige× K., Ditsopha× S., Yuki× N., Yamamoto× T., Toyohiro× D., Kaewdook |
|||||
| 抄録 | ||||||
| 内容記述タイプ | Abstract | |||||
| 内容記述 | Fracture toughness test using single edge notch beam (SENB) specimen of zirconia ceramics with 3% MgO fabricated at different sintering temperatures was conducted at quasi-static loading speed of 1.0mm/min by means of universal testing machine. Fracture toughness and bending strength were increasing as the sintering temperature was raising. Load-displacement curve was observed and discussed based on defects distribution and phase transformation in the specimen. | |||||
| 言語 | en | |||||
| 書誌情報 |
en : International Conference on Applied Electrical and Mechanical Engineering 2019 p. 35-37, 発行日 2019-09 |
|||||
| 著者版フラグ | ||||||
| 出版タイプ | VoR | |||||
| 出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||
