@article{oai:miyazaki-u.repo.nii.ac.jp:00001126, author = {木之下, 広幸 and Kinoshita, Hiroyuki and 中園, 健文 and 小山田, 正幸 and Oyamada, Masayuki and Yuji, Toshifumi and 湯地, 敏史 and Yuji, Tosifumi and 安東, 崇裕 and 池田, 清彦 and Ikeda, Kiyohiko and Kaizu, Koichi and 海津, 浩一 and 小林, 太一 and Kobayashi, Taichi and 福山, 華子 and 川崎, 久光 and Nakazono, Takefumi and 小山田, 正幸 and Oyamada, Masayuki and Ando, Takahiro and Fukuyama, Hanako and Kawasaki, Hisamitsu}, issue = {3}, journal = {実験力学}, month = {Sep}, note = {As a recycling technique for the waste GFRP, authors have proposed the manufacturing process of the porous glass fiber reinforced tile by mixing the clay and the crushed waste GFRP and by firing the mixture. In this paper, the influence of the particle size of GFRP on properties of tiles produced by the proposed process was investigated. First, several types of tiles were produced by changing the particle size of the crushed GFRP, the mixing ratio of the GFRP and clay, and the firing temperatures. Then the density, water absorption and bending strength of the specimens were examined by the experiment. From obtained results, it was found that the bending strength of tiles was higher, as the particle size of the GFRP was smaller, and that the effect the particle size of the GFRP on bending strength of tiles was bigger, as the firing temperature was higher. It was also found that the mixing ratio of the GFRP and clay and the firing temperature greatly affected the water absorption of tiles, and the particle size of the GFRP was not effective for the water absorption. It was demonstrated that tiles with both the high strength and water absorption could be made when GFRP with the particle size of 1mm or less was used and the firing temperature was over 1000 degrees.}, pages = {241--248}, title = {廃棄GFRPを再利用した高強度多孔質タイルの開発 : タイルの特性に及ぼすGFRPの粒度の影響}, volume = {11}, year = {2009}, yomi = {キノシタ, ヒロユキ and ナカゾノ, タケフミ and オヤマダ, マサユキ and ユジ, トシフミ and アンドウ, タカヒロ and イケダ, キヨヒコ and カイズ, コウイチ and コバヤシ, タイチ and フクヤマ, ハナコ and カワサキ, ヒサミツ and オヤマダ, マサユキ} }